for
1987-1995 Jeep YJ Wranglers
|
|
|
Our engine/transmission skid plates for the '87-'95 Jeep YJ Wrangler are available for both the 4 cylinder and 6 cylinder engines. No one else makes a skid plate to protect the engine and transmission of your YJ. Nobody!
|
|
These skid plates are designed to provide complete coverage for your vulnerable engine oil pan, transmission, AND the front portion of your exhaust system. Unlike some of our competitors, you don't need to buy two different skid plates to get less coverage. One easily installed skid plate provides the complete protection you need to feel confident while on the trail.
|
|
These skid plates are made of 3/16" thick steel that is laser cut and CNC folded for consistent quality that sets the standard for Jeep skid plates. They are also reinforced with 1/4" thick steel angle along the driver's side to provide plenty of strength while easily clearing both your exhaust system and your driveshaft. (Most of our competitors have interferences with one or the other, but not Skid Row!) Our skid plates are also sand-blasted prior to being powder-coated to assure that the finish adheres better than our competitor's coatings. We use a semi-gloss black for an attractive finish that's easy to touch up when necessary.
|
They mount solidly to the Jeep's frame and are specially designed for easy bolt-up installation with minimal drilling. Only two holes will need to be drilled through the leading edge of your transfer case skid plate for the carriage bolts that hold the two skids together. In addition, an oil drain hole has been provided to make changing your oil possible without removing the skid plate.
|
|
We've also learned during our off-road testing that these engine skid plates help you get over obstacles by preventing your transfer case skid plate from catching on whatever you're driving over. So you not only get added protection and peace of mind, your Jeep will be more capable as well!!
|
To see what our customers and others are saying about our skid plates.
Visit our "Customer Comments" page.
|
Please note that 4 cylinder models built after May 1995 use TJ oil pans.
- This means that the oil drain hole is on the side of the pan, not the rear...which is different from all previous model years. While we don't make a separate skid plate for these models, we can provide a part to use as a template to make a new drain hole. This piece can then be used to fill the original hole. Obviously, cutting and welding of the skid plate will be required for this modification. If you need this piece please ask us for a skid plate munchkin and we'll provide it free. If you're unsure, it's best to contact us and ask.
|
|
|
Engine/Transmission skid plate for 4 cylinder models
JP-1000: $278.00
|
|
|
Engine/Transmission skid plate for 6 cylinder models
JP-1001: $278.00
|
|
|
|
Shown is the engine skid plate on a four cylinder '94 YJ Wrangler. Notice how much the skid plate protects and how it's mounted to provide you with the strongest, toughest engine skid plate available.
|
|
Here's another view of the skid plate. Notice that this side of the skid plate is open to make it easy for you to clean it out with a hose.
|
|
We tested our YJ skid plates for clearance on our 30 degree articulation ramp.....
|
|
....and on the trail. Our Mud Puppy is on the Rattler 1 trail in Paragon Adventure Park near Hazelton, PA. Click on the picture to get a larger view so you can see the skid plate protecting the engine, exhaust, and transmission.
|
|
This shot shows how the strut rod attaches to the underside of the driver's side motor mount. This creates a very strong mounting point that clears the driveshaft even on full compression.
|
|
This shot is of a six cylinder YJ chassis with one of our skid plates installed.
|
|
| |
